Submit an integration with the OIN Wizard

Learn how to submit an OIDC, SAML 2.0, or SCIM 2.0 integration to the Okta Integration Network (OIN) using the OIN Wizard.

---

What you need

• An Okta Developer Edition org (opens new window). The OIN Wizard is only available in Okta Developer Edition orgs.
• An admin user in the Okta Developer Edition org with either the super admin or the app and org admin roles
• A functional integration based on the Build a Single Sign-On integration or Build a SCIM provisioning integration guide
• Google Chrome browser with the Okta Browser Plugin installed (see OIN Wizard requirements)
• The various items necessary for submission in accordance with the OIN submission requirements

---

Overview

Okta provides you with a seamless experience to integrate and submit your app for publication in the Okta Integration Network (OIN) (opens new window). When you obtain an Okta Developer Edition org (opens new window), you can use it as a sandbox to integrate your app with Okta and explore more Okta features. When you decide to publish your integration to the OIN, you can use the same Developer Edition org to submit your integration using the OIN Wizard.

The OIN Wizard is a full-service tool in the Admin Console for you to do the following:

• Provide all your integration submission details.

• Generate an app instance in your org for testing:

  • Test your SSO integration with the OIN Submission Tester.
  • Test your SCIM integration with manual test cases and Runscope test suites.

• Submit your integration directly to the OIN team when you're satisfied with your test results.

• Monitor the status of your submissions through the Your OIN Integrations dashboard.

• Edit published integrations and resubmit them to the OIN.

The OIN team verifies your submitted integration before they publish it in the OIN catalog (opens new window).

Note: SPA apps aren't accepted in the OIN Wizard. You can only submit cloud-based SaaS apps (web apps with a back end) in the OIN Wizard.

Protocols supported

This guide covers submissions that use the following protocols:

• OpenID Connect (OIDC) (opens new window)

• Security Assertion Markup Language (SAML) 2.0 (opens new window)

• System for Cross-domain Identity Management (SCIM) 2.0 (opens new window)

Notes:

• SWA app integrations are no longer accepted for publication in the OIN catalog. However, the OIN team still maintains existing SWA apps.
• There are protocol-specific limitations on integrations in the OIN. See OIN limitations.

Start a submission

Review the OIN submission requirements before you start your submission. There are artifacts and technical details that you need to provide during the submission process.

Note: As a best practice, add two or three extra admin users in your Okta org to manage the integration. This ensures that your team can access the integration for updates in the future. See Add users manually (opens new window) and ensure that the app and org admin roles are assigned to your admin users. The super admin role also provides the same access, but Okta recommends limiting super admin role assignments.

Start your integration submission for OIN publication:

1. Sign in to your Developer Edition org as a user with either the super admin (SUPER_ADMIN) role , or the app (APP_ADMIN) and org (ORG_ADMIN) admin roles (opens new window).

   Note: Submit your integration from an Okta account that has your company domain in the email address. You can't use an account with a personal email address. The OIN team doesn't review submissions from personal email accounts.

2. Go to Applications > Your OIN Integrations in the Admin Console.

   Note: If you only want to test an existing submission, see Navigate directly to test your integration.

3. Click Build new OIN integration. The OIN Wizard appears.

4. Select the protocols that your integration supports from the Select protocol section.

   Note: The instructions on this page are for the

   OpenID Connect (OIDC)

   protocol.
   If you want to change the protocol instructions on this page, select the protocol you want from the Instructions for dropdown list on the right.

5. Click Configure your integration.

Configure your integration

Continue with the OIN Wizard and configure your integration:

OIN catalog properties

1. In the OIN catalog properties section, specify the following OIN catalog information:

   Property	Description
   Display name *	Provide a name for your integration. This is the main title used for your integration in the OIN. The maximum field length is 64 characters.
   Description *	Give a general description of your app and the benefits of this integration to your customers. See App description guidelines.
   Logo *	Upload a PNG, JPG, or GIF file of a logo to accompany your integration in the catalog. The logo file must be less than one MB. See Logo guidelines.

   * Required properties

Integration variables

Configure integration variables if your URLs are dynamic for each tenant. The variables are for your customer admins to add their specific tenant values during installation. See Dynamic properties with Okta Expression Language.

1. In the Integration variables section, specify the name and label for each variable:

   Property	Description
   Label *	A descriptive name for the dynamic variable that admins see when they install your app integration. For example: Division subdomain
   Name *	Specify the variable name. This variable name is used to construct the dynamic URL. It's hidden from admins and is only passed to your external app. String is the only variable type supported. Note: Use alphanumeric lowercase and underscore characters for the variable name field. The first character must be a letter and the maximum field length is 1024 characters. For example: subdomain_div1

   * This section is optional, but if you specify a variable, both Label and Name properties are required.

2. Click + Add another to add another variable. You can add up to three variables.

   Note: If you need to edit more than three variables for a published integration, contact the OIN team at oin@okta.com.

3. If you need to delete a variable, click the delete icon () next to it.

OIDC

properties

Note: The instructions on this page are for the

OpenID Connect (OIDC)

protocol.
If you want to change the protocol instructions on this page, select the protocol from the Instructions for dropdown list on the right.

Continue with the OIN Wizard and configure your protocol settings:

1. Specify the following protocol properties in the

   OIDC

   properties section:

   Property	Description
   Redirect URIs *	Specify one or more redirect URIs for your app. If your URI varies per tenant, include the variable names that you created in your URI. For example: https://{app.subdomain}.example.org/strawberry/login. See Dynamic properties with Okta Expression Language. The maximum field length is 1024 characters. Click + Add another to add more URIs.
   Initiate login URI	Specify the URI to redirect users when they select your app from their End-User Dashboard. This URI is optional and is used if your integration handles constructing an authorization request and redirecting the end user back to Okta. You can use integration variables if your initiate-login URI varies per tenant. For example: https://{app.subdomain}.example.org/strawberry/start-login. See Dynamic properties with Okta Expression Language.
   Post-logout URI	Specify the sign-out redirect URIs for your app. Include a sign-out URI if you have a location where you want to send your end user after they sign out of your app. You can use integration variables if your sign-out URI varies per tenant. For example: https://{app.subdomain}.example.org/strawberry/logout. See Dynamic properties with Okta Expression Language. Click + Add another to add more URIs.
   Configuration guide URL *	Specify the URL link to your customer-facing instructions on how to configure SSO between Okta and your app with OIDC. See Customer configuration document guidelines.

   * Required properties

2. Click Get started with testing to save your edits and move to the testing section, where you need to enter your integration test details.

Dynamic properties with Okta Expression Language

The OIN Wizard supports Okta Expression Language to generate dynamic properties, such as URLs or URIs, based on your customer tenant. You can specify dynamic strings for your

OIDC

properties in the OIN Wizard:

1. Add your integration variables in the OIN Wizard. These variables become fields for customers to enter during your OIN integration installation to identify their tenant.

2. Use the integration variables with Expression Language format in your

   OIDC

   property definitions for dynamic values based on customer information.

For example, if you have an OIDC configuration variable called subdomain, then you can set your Redirect URI string to https://{app.subdomain}.example.org/strawberry/login. When your customer sets their subdomain variable value to berryfarm, then https://berryfarm.example.org/strawberry/login is their redirect URL.

Note: A variable can include a complete URL (for example, https://example.com). This enables you to use global variables, such as app.baseURL.

The following are Expression Language specifics for OIDC properties:

• OIDC integration variables you define in the OIN Wizard are considered Application properties and have the app. prefix when you reference them in Expression Language. For example, if your integration variable name is subdomain, then you can reference that variable with app.subdomain.

• OIDC properties support Expression Language conditional expressions and evaluates everything between curly brackets. For example, the following is an expression for the Redirect URI property:

  {String.stringContains(app.environment, 'PROD') ? 'https://app.data.one/' : 'https://app-sandbox.data.one/'}
  

Enter test information

From the OIN Wizard Test your integration page, specify the information that's required for testing your integration. The OIN team uses this information to verify your integration after submission.

Test information for Okta review

A dedicated test admin account in your app is required for Okta integration testing. This test account needs to be active beyond the submission period in case Okta needs to update or troubleshoot your app integration. Ensure that the test admin account has:

• Privileges to configure admin settings in your test app
• Privileges to administer test users in your test app

See Test account guidelines.

Note: This admin account is in your app and not an account in Okta.

In the Testing information for Okta review section, specify the following Test account details:

Property	Description
Account URL *	A static URL to sign in to your app. An OIN analyst goes to this URL and uses the account credentials you provide in the subsequent fields to sign in to your app.
Username *	The username for your test admin account. The OIN analyst signs in with this username to execute test cases. The preferred account username is isvtest@okta.com.
Password *	The password for your test admin account
Support contact *	Provide an email for Okta to contact your company about your integration. This email isn't exposed in the OIN catalogs or to your customers. Okta uses this email to contact your company for integration status updates, issues during the QA testing phase, or for ongoing maintenance. See Escalation support contact in the customer support-contact guidelines.
Testing instructions	Include any other information that you think the OIN analyst needs to know about your integration (such as the admin account or the testing configuration). You can also provide instructions on how to add test user accounts.

* Required properties

OIDC

tests

In the OIDC tests section, specify the following sign-in flow details:

Property		Description
Supported sign-in flows		Indicates which sign-in flow your integration supports
	IdP	Sign-in flow is initiated from the Okta End-User Dashboard. If you specified Initiate login URI previously from the OIDC properties section, then this flow is selected.
	SP	Sign-in flow is initiated from your app sign-in page. This flow is selected and read-only because all OIDC SSO integrations must support the SP-initiated flow.
Supports Just-In-Time provisioning? *		Indicate if your integration supports Just-In-Time (JIT) provisioning. With JIT provisioning, user profiles are created when they sign in for the first time. This eliminates the need to create user accounts in advance.
	Yes	Your integration supports JIT.
	No	Your integration doesn't support JIT.
SP Initiate URL		Specify the URL for SP-initiated sign-in flows. This URL is required for the SP-initiated flow. The maximum URL length is 512 characters.

* Required properties

Click Test your integration to save your test information and begin the integration testing phase.

Test your integration

The OIN Wizard journey includes the Test integration experience page to help you configure and test your integration within the same org before submission. These are the tasks that you need to complete:

1. Generate instances for testing. You need to create an app integration instance to test each protocol that your integration supports.

   • For an SSO integration, configure SSO and assign test users on the test instance.
   • For a SCIM integration, configure provisioning and map user profile attributes on the test instance.

2. Test your integration.

   • For an SSO integration, test the required flows in the OIN Submission Tester with your generated test instance. Fix any test failures from the OIN Submission Tester, then regenerate the test instance (if necessary) and retest.
   • For a SCIM integration, execute the Runscope CRUD tests and the Okta manual integration tests with your generated test instance.

3. Submit your integration after all required tests are successful.

Note: You must have the Okta Browser Plugin installed with Allow in Incognito enabled before you use the OIN Submission Tester. See OIN Wizard requirements.

Navigate directly to test your integration

You can navigate directly to the OIN Wizard Test integration page if you have an existing submission in the Your OIN Integrations dashboard. You can bypass the Select protocol, Configure your integration, and Test your integration pages in the OIN Wizard, and start generating instances for testing. This saves you time and avoids unnecessary updates to an existing integration submission.

Follow these steps to bypass the configuration pages in the OIN Wizard:

1. From the Your OIN Integrations dashboard, select the more icon () next to the integration submission that you want to test.

2. Select Test your integration from the menu.

   The OIN Wizard Test integration page appears for you to generate an instance and test your integration.

   Note: If you haven't specified test information in the Test your integration page, then you're directed to this page to enter testing details. You can go to the Test integration page only if the protocols, configuration, and test details are provided in your submission.

Generate instances for testing

Generate instances for testing in your Okta Developer Edition org directly from the OIN Wizard. The OIN Wizard takes the configuration and test information from your OIN submission and allows you to configure a specific integration instance to your test app. You can test the admin and end-user sign-in experiences with the generated instance flow.

Okta recommends that you generate an instance for testing each protocol supported by your integration:

• You must generate separate instances for testing if you support two SSO protocols (one for OIDC and one for SAML). The OIN Submission Tester can only test one protocol at a time.
• If your SSO integration also supports SCIM, then create one instance for SCIM protocol testing and one instance for each SSO protocol testing.

There are certain conditions where you can test two protocols on one instance. You can create one instance for SSO and SCIM testing if your integration meets all of these conditions:

• It supports SCIM and one SSO protocol
• It doesn't support SSO JIT
• The Create User SCIM operation is enabled

A Developer Edition org has a maximum of five active instances, so manage your test instances accordingly. See Deactivate an app instance in your org to deactivate any instances that you aren't using.

Generate an instance for

OIDC

Note: The steps in this section are for generating one instance to test the

OIDC

protocol.
If you want to change the generate instance instructions, select the protocol you want from the Instructions for dropdown list on the right.

1. From the Test integration page, click Generate instance.

   A page appears to add your instance details. See Add existing app integrations (opens new window).

   When your integration is published in the OIN catalog, the customer admin uses the Admin Console Browse App Catalog > add an existing app integration (opens new window) page to add your integration to their Okta org. The next few steps are exactly what your customer admins experience when they instantiate your integration with Okta. This enables you to assume the customer admin persona to verify that app labels and properties are appropriate for your integration.

   If you need to change any labels or properties, go back to edit your submission.

   Note: There's a limit of five app instances in a Okta Developer Edition org. The Generate instance option is deactivated when you reach this limit. Deactivate unused instances to make room for new instances in your org. See Deactivate app instances in your org.

2. Specify the Application label and any app properties required in the General settings tab.

3. Click Done. The Assignments tab appears. You can assign users to your integration later, see the next Assign test users to your integration task.

4. Click the Sign On tab to view and copy the OIDC client ID and secret.

5. Click View Setup Instructions to open a new tab to your integration setup instructions. This is the customer configuration guide that you previously specified in the OIN Wizard.

6. Follow the instructions in your guide to set up the SSO integration on your app with the OIDC client ID and secret provided.

7. Follow these steps if you have an Identity Engine Developer Edition org:

   1. Click the Sign On tab, scroll to the User authentication section, and click Edit.
   2. Select Password only from the Authentication policy dropdown menu.
   3. Click Save.

   Note: Most recent Okta Developer Edition orgs are Identity Engine orgs. See OIN Wizard authentication policy for testing.

8. Assign test users to your instance before you start testing your SSO flows.

Assign test users to your integration instance

For SSO-only flow tests, create your test users in Okta before you assign them to your integration. See Add users manually (opens new window) and Assign app integrations (opens new window) topics in the Okta product documentation.

For SSO flow tests without JIT provisioning, you need to create the same test user in your app. If your integration supports JIT provisioning, Okta provisions the test user on your app automatically.

For SCIM provisioning, you can assign an imported user to your app. Alternatively, you can create a user in Okta that can be pushed to your app through SCIM before you assign the user to your app. See About adding provisioned users (opens new window).

Note: You need to have the org admin role assigned to you before you can create users in Okta.

To assign test users to your integration:

1. Continue from the OIN Wizard > Test integration > Generate instance > your app instance page.

2. Click the Assignments tab.

3. Click Assign, and then select either Assign to People or Assign to Groups.

4. Enter the appropriate people or groups that you want to have SSO into your app, and then click Assign for each.

5. Verify the user-specific attributes for any people that you add, and then select Save and Go Back.

6. Click Done.

7. Click Begin testing (upper-right corner) from the OIN Wizard. After the Test integration page appears, continue to the Application instances for testing section to include your test instance in the OIN Submission Tester.

   Note: If you're not in the OIN Wizard, go to Your OIN Integration > Select protocol > Configure your integration > Test integration.

Required app instances

The Required app instances box shows you the instances detected in your org that are available to test your integration. It also shows you the test instances required for the OIN Submission Tester based on your selected protocols:

• The CURRENT VERSION status indicates the instances that you need to test your current integration submission.
• The PUBLISHED VERSION status indicates the instances that you need to test backwards compatibility if you edit a previously published integration. See Update your integration.

Application instances for testing

The Application instances for testing section displays, by default, the instances available in your org that are eligible for submission testing.

Note: The filter () is automatically set to only show eligible instances.

An instance is eligible if it was generated from the latest version of the integration submission in the OIN Wizard. An instance is ineligible if it was generated from a previous version of the integration submission and you later made edits to the submission. This is to ensure that you test your integration based on the latest submission details.

If you modify a published OIN integration, you must generate an instance based on the currently published integration for backwards-compatibility testing. A backwards-compatible instance is eligible if it was generated from the published version of the integration before any edits are made in the current submission. The OIN Wizard detects if you're modifying a published OIN integration and asks you to generate a backwards-compatible instance before you make any edits.

Note: There's a maximum of five active instances allowed in an Okta Developer Edition org, so deactivate or delete any instances you aren't using. Click Clear filter to find instances in your org that may be active and ineligible for testing.

Add to Tester

Note: The OIN Submission Tester only supports SSO integrations. The Add to Tester option isn't available for SCIM integrations.

• Click Add to Tester next to the instance in the Application instances for testing list to include it for testing with the OIN Submission Tester. The Add to Tester option only appears for SSO instances that are active and eligible for testing.

  The corresponding test cases are populated with the instance name and the Run test option is enabled in the OIN Submission Tester.

• Click Remove from Tester to disable the test cases that are associated with the SSO instance.

  The instance name and test results are removed for the corresponding test cases in the OIN Submission Tester. The Run test option is also disabled.

Deactivate an app instance in your org

Since the Okta Developer Edition org has a limit of five active app instances, deactivate any instances you're not using in the org.

To deactivate an instance from the OIN Wizard:

1. Go to Test integration > Application instances for testing.
2. Click Clear filters to see all instances in your org.
3. Disable the ACTIVE toggle next to the app instance you want to deactivate.

Alternatively, to deactivate an app instance without the OIN Wizard, see Deactivate app integrations (opens new window).

Update an app instance in your org

To edit the app instance from the OIN Wizard, follow these steps:

1. Go to Test integration > Application instances for testing.

2. Click Clear filters to see all instances in your org if you don't see the instance that you want to edit.

3. Select Update instance details from the more icon () next to the app instance you want to update. The instance details page appears.

4. Edit the app instance. You can edit app instance settings or assign users to your app instance (opens new window).

5. Return to the OIN Wizard:

   • Click Begin testing (upper-right corner) for the current submission instance.

     The Test integration page appears.

   • Click Go to integrations (upper-right corner) for the backwards-compatible instance.

     The Your OIN Integrations dashboard appears. Go to your integration submission > Configure your integration > Get started with testing to continue with testing your integration.

Note: After you edit a test instance, any previous test results for that instance are invalid and removed from the OIN Submission Tester. Rerun all the required tests again with the new instance.

OIN Submission Tester

Note: The OIN Submission Tester only supports SSO integrations.

The Test integration page includes the integrated OIN Submission Tester, which is a plugin app that runs the minimal tests required to ensure that your sign-in flow works as expected. Ideally, you want to execute other variations of these test cases without the OIN Submission Tester, such as negative and edge test cases. You can't submit your integration in the OIN Wizard until all required tests in the OIN Submission Tester pass.

Before you start testing with the OIN Submission Tester, see OIN Wizard test requirements.

Notes:

• Click Initialize Tester if you're using the OIN Submission Tester for the first time.
• Click Refresh Tester session for a new test session if the OIN Submission Tester session expired.
• See Troubleshoot the OIN Submission Tester if you have issues loading the OIN Submission Tester.

The OIN Submission Tester includes the mechanism to test the following flows:

• IdP flow
• SP flow
• Just-In-Time (JIT) provisioning (with IdP flow)
• Just-In-Time (JIT) provisioning (with SP flow)

Note: The JIT provisioning (with SP flow) test case appears in the OIN Submission Tester if your integration supports JIT and only the SP flow. If your integration supports JIT, IdP, and SP flows, then a successful JIT provisioning (with IdP flow) test is sufficient for submission.

The test cases for these flows appear in the Test integration using the OIN Submission Tester section depending on your OIN Wizard test information.

Note: See Run test for the steps on how to run each test case.

Your test results in the OIN Submission Tester are valid for 48 hours after the test run. Rerun all your test cases in the OIN Submission Tester if they expired.

Submit your integration if all your tests have passed. If you have errors, see Failed tests to resolve the errors.

Run tests

The Run test option is enabled for test cases with an eligible test instance.

After you click Run test, the OIN Submission Tester opens a browser window in incognito mode. Use the incognito browser window to execute the test and verify it with the Test in progress dialog that appears in the upper-right corner.

Run the IdP flow test

To run the IdP flow test:

1. Click Run test next to the IdP flow test case.

   A new Chrome browser in incognito mode appears for you to sign in.

2. Sign in to Okta as an end user that was assigned to your test app instance.

   • Your app tile appears on the Okta End-User Dashboard.
   • The Tester selects your app tile and you're signed in to your app.

3. Verify that the test end user signed in to your app with the correct profile.

4. Select The user successfully signed in to your app in the upper-right Test in progress dialog to confirm that the IdP flow test passed.

5. Click Continue from the Test in progress dialog to sign out of your app.

   The incognito browser closes and you're redirected back to the OIN Submission Tester. The OIN Submission Tester records the test run result and timestamp.

6. Click the IdP flow expand icon () to view the test steps and network traffic details for the test run.

   If your test run wasn't successful, this is a useful tool to troubleshoot the issues and correct your integration, instance, or submission details.

Run the SP flow test

To run the SP flow test:

1. Click Run test next to the SP flow test case.

   A new Chrome browser in incognito mode appears for you to sign in.

2. Sign in to your app as the test end user that was assigned to your app instance.

3. Verify that the test end user signed in to your app with the correct profile.

4. Select The user successfully signed in to your app in the upper-right Test in progress dialog to confirm that the SP flow test passed.

5. Click Continue from the Test in progress dialog to sign out of your app.

   The incognito browser closes and you're redirected back to the OIN Submission Tester. The OIN Submission Tester records the test run result and timestamp.

6. Click the SP flow expand icon () to view the test steps and network traffic details for the test run.

Run the JIT provisioning with IdP flow test

For the JIT provisioning test, the OIN Submission Tester creates a temporary Okta test user account for you to verify that JIT provisioning was successful. The Tester then removes the test user account from Okta to complete the test.

Notes:

• Ensure that your app integration supports JIT provisioning before you run the JIT provisioning test.
• For JIT provisioning testing, you must have either the super admin role or both the app admin and org admin roles assigned to you.
• The JIT provisioning test case appears only if you select Supports Just-In-Time provisioning in your submission.

To run the JIT provisioning with IdP flow test:

1. Click Run test next to the JIT provisioning (w/ IdP flow) test case.

   The OIN Submission Tester executes the following steps for the JIT provisioning test case:

   1. Creates a user in Okta and assigns them to the test app instance.
   2. Open an incognito browser window to sign in to Okta.
   3. Sign in to Okta as the new test user.
   4. Select the app tile.
   5. Wait for confirmation that the new test user signed in and was provisioned in your app (you're responsible to verify this step).

2. Verify that the test user signed in to your app with the correct first name, last name, and email attributes.

   Note: You can go back to the OIN Submission Tester window and expand the test case to view network traffic details for this test run. The NETWORK TRAFFIC tab contains API calls to Okta with the test user details in the request payload.

3. Select The user successfully signed in to your app in the upper-right Test in progress dialog to confirm that the JIT provisioning IdP flow test passed.

4. Click Continue from the Test in progress dialog to sign out of your app.

   The OIN Submission Tester executes the following steps after you click Continue:

   1. Signs out of the app and closes the incognito browser window.
   2. Unassigns the test user from the app instance in Okta.
   3. Deletes the test user from Okta.
   4. Records the test run result and timestamp in the OIN Submission Tester.
   5. Redirects you back to the OIN Submission Tester.

5. Click the JIT provisioning (w/ IdP flow) expand icon () to view the test steps and network traffic details for the test run.

Note: The test user account created in your app from JIT provisioning persists after the JIT provisioning test. The OIN Submission Tester only removes the temporary test user account from your Okta org. It's your responsibility to manage the JIT test user accounts in your app.

Run the JIT provisioning with SP flow test

You're only required to pass one JIT provisioning test case to submit your integration. The OIN Submission Tester includes the JIT provisioning (w/ SP flow) test case if you support JIT and only the SP flow. If your integration supports JIT, IdP, and SP flows, then a successful JIT provisioning (w/ IdP flow) test is sufficient for submission.

Similar to the JIT provisioning with IdP flow test, the OIN Submission Tester creates a temporary Okta test user account for you to verify that JIT provisioning was successful. The Tester then removes the test user account from Okta to complete the test.

Follow the same steps in Run the JIT provisioning with IdP flow test to run the JIT provisioning with SP flow test. The only difference in the SP test is that the OIN Submission Tester opens an incognito browser window to sign in to your app first.

Failed tests

If any of your test cases fail, investigate and resolve the failure before you submit your integration. You can only submit integrations that have successfully passed all the required tests in the OIN Submission Tester.

If you have to update SSO or test detail properties in your submission to resolve your failed test cases, then generate a new app integration instance for testing. Assign test users to your new integration instance before you execute all your SSO test cases again.

Note: You don't have to generate a new app instance for every failed test scenario. If you have an environment issue or if you forgot to assign a user, you can fix your configuration and run the tests again. Generate a new instance if you need to modify an SSO property, such as an integration variable, a redirect URI, or an ACS URL.

It's good practice to deactivate your test instances that aren't in use. You can later delete the instance to clean your app integration list.

If you have questions or need more support, email Okta developer support at developers@okta.com and include your test results. To obtain your test results:

1. From the OIN Submission Tester, click Export results (upper-right corner) to download a JSON-formatted file of all your test results.

All required tests in the OIN Submission Tester must have passed within 48 hours of submitting your integration.

Test your SCIM integration

You need to run three sets of tests for SCIM integrations:

1. SCIM API specification tests

   You need to first test your SCIM API service before you conduct Okta-SCIM integration tests. Okta provides you with a SCIM API specification test suite to execute in Runscope. See Test your SCIM API for instructions on how to run this test suite. Provide the test results URL in the Link to Runscope spec test results field when you submit your integration to the OIN.

2. Runscope create, read, update, and delete (CRUD) user profile tests

   Enter the results URL from these tests in the Link to Runscope CRUD test results field when you submit your integration to the OIN.

3. Manual Okta SCIM integration tests

   You must certify that you've completed these tests when you submit your integration to the OIN.

Runscope CRUD tests

1. Download the Okta SCIM 2.0 CRUD Test file.

   This CRUD test file is built for the BlazeMeter Runscope (opens new window) API monitoring tool. If you don't have a Runscope account, you can sign up with a free trial to Runscope (opens new window) for Okta developers.

2. From Runscope, click Import Test.

3. Select API Monitoring Tests as the import format.

4. Click Choose File and select the Okta SCIM 2.0 CRUD Test file.

5. Click Import API Test. In this new test bucket, click Editor from the left-navigation menu.

6. Click Test Settings and then click Initial Variables.

7. Add the following variables with values that match your SCIM integration:

   • oktaOrgUrl: The base URL for your Okta org. Include the https:// prefix.
   • oktaAppId: The unique identifier that's assigned to your test app instance. You can see this value in the App Embed Link panel under the General tab for your instance.

   

   • oktaToken: The Okta API token used by Runscope to connect to Okta APIs. You can generate an API token inside your org. See Create an API token.

   • SCIMUrl: The base URL of the SCIM service. For example: https://example.com/scim/v2

   • SCIMAuth: The authorization token used to access your SCIM API. You can use the same authorization token you used to Enable API integration from Generate an instance for

     OIDC

     .

     The following is an example of the Runscope variable values:

   

8. Click Test Settings and then click Initial Script.

9. Copy the contents of the Okta CRUD Initial Script text file and paste into this Runscope console.

10. Click Save & Run.

Review Runscope test results

On the left of your Runscope page, the test appears in the Recent Test Runs section.

1. Click View Progress from the Recent Test Runs section. As the test suite runs, Runscope displays live updates of the test in progress. After the test suite completes, the main panel displays the results of your test.
2. Click a test case to see its Request, Response, and Connection information.

When you're satisfied with your Runscope CRUD test results, enter them in the Link to Runscope CRUD test results field:

1. From your Runscope dashboard, open the test results that you want to share.

2. At the top of the test result, set the Private | Shareable toggle to Shareable.

3. Copy the URL for the test result. The test results can be viewed in detail, but the test can't be edited or rerun by people outside of your team.

   Example of a test result URL: https://www.runscope.com/radar/abcdefghijkl/m01nopq2-3456-7r8s-9012-t34567uvw890/history/123ef4gh-i567-89j0-1k2l-3m4n5o678901.

4. Paste the test results URL into the Link to Runscope CRUD test results field in the OIN Wizard Test integration > SCIM integration testing step section.

Manual Okta SCIM integration tests

Execute the test cases in the Okta SCIM Test Plan. Skip the test cases for the features that your integration doesn't support. All the other supported-feature test cases must pass before you can submit your integration to the OIN.

Depending on your test scenario, you can import users from the Import tab (see Import users (opens new window)) or create users in Okta before assigning them to your test instance. See About adding provisioned users (opens new window) and Assign test users to your integration instance.

After you've successfully completed the manual SCIM integration tests, see Submit your integration.

Update your integration

You can modify your published SSO and SCIM integration in the OIN Wizard.

Note: All SSO integrations published from the OIN Manager have been migrated to the OIN Wizard. Okta is migrating all SCIM integrations previously published from the OIN Manager to the OIN Wizard. If you don't see your published SCIM integration in the Your OIN Integrations dashboard, go to the OIN Manager to make any updates.

When you edit a published OIN integration, test the flows for the updated version and the published version for backwards compatibility. Testing the published version for backwards compatibility ensures that your integration still works for users who have already installed it. See Update integration considerations before you edit your published integration. After you successfully test the updated and published versions of your integration, resubmit it to the OIN team.

Note: When you edit your published OIN integration, your previous PUBLISHED status and date are overwritten with the DRAFT status and current date.

To update a previously published OIN integration:

1. Sign in to your Okta Developer Edition org as a user with either app admin or super admin roles.

   Note: Edit your integration from an Okta account that has your company domain in the email address. You can't use an account with a personal email address. The OIN team doesn't review submission edits from a personal email account.

2. In the Admin Console, go to Applications > Your OIN Integrations.

   Note: If you don't need to edit your submission and want to jump to testing, see Navigate directly to test your integration.

3. Click your published integration to update from the dashboard. Your published OIN submission appears in read-only mode.

4. From the This integration is read-only information box, click Edit integration.

   Note: If you open a submission in DRAFT status, it's not in read-only mode and the Edit integration option isn't available.

   Continue to edit your draft submission as a new submission. See Start a submission.

5. If the OIN Wizard doesn't detect an instance to test your published integration in the org, then an Application instance not detected dialog appears. Click Generate instance to create an app instance based on your published OIN integration. See Add existing app integrations (opens new window) to create an instance for backwards-compatibility testing.

   Note: The Generate instance option is disabled if you have five active instances in your org. Deactivate instances that you're not using.

   If the OIN Wizard detects an instance based on your published integration, the dialog doesn't appear. This is usually the case if you tested and submitted your published integration from the same org.

6. Continue to update your integration in the Select protocol, Configure your integration, and Test integration pages. See Update integration considerations for backwards compatibility with integration variables.

   The Required app instances box contains the following items:

   • The instances that you need to test the PUBLISHED VERSION of your OIN integration.
   • The instances that you need to test the CURRENT VERSION of your integration submission.

   See Required app instances.

   Note: If the OIN Submission Tester session expired, click Refresh tester session for a new test session.

   Backwards-compatible test instances that were generated from your published integration appear in the Application instances for testing list.

7. Click Generate Instance to create an instance required for the CURRENT VERSION from the Required app instances status box.

   See Generate an instance for testing to create instances for your current submission.

   Note: There's a maximum of five active app instances allowed in a Developer Edition org. Deactivate any instances that you don't need for testing.

8. Test your integration protocol:

   • For SSO testing, click Add to Tester for each required test instance. See Add to Tester.
     The required tests appear for each test instance. Run your tests from the OIN Submission Tester. See OIN Submission Tester. If you encounter errors, see Failed tests for help with resolving the issues.

   • For SCIM testing, see Test your SCIM integration for all the test requirements.

9. Submit your integration if all your tests passed.

Update integration considerations

• For published integrations that were migrated from the OIN Manager, if you need to update configured properties that aren't available the OIN Wizard, contact oin@okta.com.

• You can't update a published SCIM integration with Basic Authentication. This breaks the integration for existing customers. For any updates, you must submit a new SCIM integration that implements header authentication or OAuth 2.0 authentication. You can use either token or bearer token format for header authentication.

• If you edit a published SCIM integration that was migrated from the OIN Manager, the Import users (and Import groups if groups are managed) capability is automatically enabled in the OIN Wizard. You must support and test this capability if your previous SCIM integration didn't support it. If you need help with implementing this feature, contact developers@okta.com.

• When you update an integration that's already published, be mindful to preserve backwards compatibility for your integration. Older instances of your integration could be in use by Okta customers.

  • If you modify the Name (name) property of your integration variables, Okta removes the original variable and creates a variable with your updated name. This action negatively impacts your existing customers if you use the original variable in your integration dynamic properties.

  • Migrated published integrations from the OIN Manager don't have some OIN Wizard restrictions. For instance:

    • Published integrations can have more than three integration variables
    • Published integrations can have variable names with uppercase letters
    • Published integrations can use http (instead of enforced https) in URLs and Expression Language-supported properties

  • If your update introduces new variables and you're using dynamic URLs, ensure that your tests cover various scenarios with different possible values for those variables. See Dynamic properties with Okta Expression Language. The newly introduced variables aren't populated for older instances of your integration.

    For example:

    Your integration update introduced a new variable (companyId), and you use it in your updated redirect URL. The redirect URL changed from https://login.myapp.io to https://login.myapp.io?connection={app.companyId}. In this case, ensure that the dynamic redirect URL is also valid for existing instances where the companyId value isn't set.

    To handle empty companyId values, you can define the redirect URL as:

    https://{String.len(app.companyId) == 0 ? 'login.myapp.io' : 'login.myapp.io?connection=' + app.companyId}
    

    This expression handles both scenarios where companyId is populated or empty.

Submit your integration

After you successfully test your integration, you're ready to submit.

The OIN Wizard checks the following for SSO submissions:

• All required instances are detected.
• All required instances are active.
• All required tests passed within the last 48 hours.

The OIN Wizard checks the following for SCIM submissions:

• All required instances are detected.
• All required instances are active.
• The Link to Runscope spec test results field is specified.
• The Link to Runscope CRUD test results field is specified.

Note: See Test your SCIM integration for SCIM submission requirements.

Submit integration is enabled after all these requirements are met.

1. Select I certify that I have successfully completed required tests.
2. Click Submit integration to submit your integration.
3. Click Close wizard. The Your OIN Integration dashboard appears.

After you submit your integration, your integration is queued for OIN initial review. Okta sends you an email with the expected initial review completion date.

The OIN review process consists of two phases:

1. The initial review phase
2. The QA testing phase

Okta sends you an email at each phase of the process to inform you of the status, the expected phase completion date, and any issues for you to fix. If there are issues with your integration, make the necessary corrections and resubmit in the OIN Wizard.

Note: Sometimes, your fix doesn't include OIN Wizard edits to your integration submission. In this case, inform the OIN team of your fix so that they can continue QA testing.

Check the status of your submission on the Your OIN Integrations dashboard.

See Understand the submission review process.

Submission support

If you need help during your submission, Okta provides the following support stream for the various phases of your OIN submission:

1. Building an integration phase

   • When you're constructing your SSO app integration, you can post a question on the Okta Developer Forum (opens new window) or submit your question to developers@okta.com.

2. Using the OIN Wizard to submit an integration phase

   • If you need help with the OIN Wizard, review this document or see Publish an OIN integration.
   • Submit your OIN Wizard question to developers@okta.com if you can't find an answer in the documentation.
   • If you have an integration status issue, contact oin@okta.com.

3. Testing an integration phase

   • If you have issues during your integration testing phase, you can post a question on the Okta Developer Forum (opens new window) or submit your question to developers@okta.com.

See also

• OAuth 2.0 vs. OpenID Connect
• Okta Developer Forum: OIDC (opens new window)